This is the larger of the two.
This is the smaller of the two.
Prevents water from getting into wheel bearings. Now with double lip.
Large three-inch long, about one and one half inch diameter bushing goes inside oscillating arms. The stub axle bolt 5-21-16 goes inside this bushing. When this bushing wears out, the front wheel spindle will be loose.
Two are press fitted into stub axle 5-21-16 with one at top and one at bottom. When these wear out, the front wheel spindle will be loose.
For bottom of king pin bolt.
Covers front wheel bearing hub to keep water out of wheel bearings.
TIE ROD END, LEFT THREAD
TIE ROD END, RIGHT THREAD
Amphicar small diameter early style 1960-1964, complete with spring. Cannot be used on 1965-68 cars unless modifications are made. For late Amphicars, see 5-21-60.